Table of Contents
Advertisement
Packet received at subscriber Ethernet interface:
Each packet with this VID (
(outermost only) removed and is forwarded over the wireless interface to the sector
controller.
Packet received at subscriber wireless interface (from sector controller):
A VLAN tag is added (outermost) and set to the VID (
this
. The packet is forwarded to the subscriber Ethernet port.
Connection
Pass-through: Select pass-through to create a
packets and packets where the outermost VLAN ID tag does not match the VID
(
VLAN ID field) for with this
Connection
can be defined for each subscriber. If a pass-through
untagged packets received at the subscriber Ethernet ingress port are discarded.
Packet received at subscriber Ethernet interface:
The packet is forwarded unmodified over the wireless to the sector controller.
Packet received at subscriber wireless interface (from sector controller):
The packet is forwarded unmodified to the subscriber Ethernet port.
Connection VLAN ID: Enter the VLAN ID tag associated with this
This field is used only when 'Tagged' is selected in the
Default priority: Enter the default 802.1p priority setting.
The default priority setting is used only when the
through' mode and the associated
Default Priority value is used when adding the 802.1Q tag (
Connection
the packet being forwarded.
Parent Link ID: Enter the
value created automatically when the subscriber
: Click this text (right side of screen) to display a list of existing
Links List
Parent Group ID: Enter the
value created automatically when the subscriber
: Click this text (right side of screen) to display a list of existing
Groups List
Wireless Traffic Parameters
The sector controller allocates bandwidth for all subscribers using the Weighted Round
Robin algorithm with the combined total of all QoS levels acting as weights. The
aggregate QoS settings affect packet delay and jitter values for the entire sector.
It is strongly recommended to calculate
80i PMP Configuration Tool -- the QoS levels for each
from the
column in the
QoS
these settings, identify the maximum UL and DL burst rate for the associated
calculate the highest available level using the formula:
DL QoS Level: Enter the QoS level for downlink unicast traffic for this connection.
UL QoS Level: Enter the QoS level for uplink unicast traffic for this connection.
70-00072-01-07
Proprietary Redline Communications © 2008
&
AN-80i
VLAN ID field) has the matching VLAN tag
Connection
Connection
Tagging Mode is set to 'Tagged'. The
Group
for this
Link ID
Connection
Link
for this
Group ID
Connection
Link
and
DL QoS
Connection ID Configuration
VLAN ID field) for
Connection
to process all untagged
Connection
. Only one pass-through
is not configured, all
Group
Connection
Tagging Mode field.
Connection
Tagging is set to 'pass-
Connection
Group
. This is the unique identification
was added. See
Links List
Link IDs
. This is the unique identification
was added. See
Groups List
Group IDs
levels using the Redline AN-
UL QoS
can be read directly
Connection
section. To manually determine
.
Burst Rate - 1
Page 56 of 106
User
Manual
Connection
definition.
VLAN ID) to
below.
.
below.
.
and
Link
Sept 18, 2008
Advertisement
Table of Contents
