Configuration And Management; Clearview Nms Application; Telnet (Cli); Web Browser (Http) - Redline RDL-3000 Installation Manuallines

Universal wireless transport (uwt) system, edge wireless terminal
Hide thumbs Also See for RDL-3000:
Table of Contents

Advertisement

Edge
2.4

Configuration and Management

The following methods are available to monitor and configure the Edge system.

ClearView NMS Application

The Edge can be configured and monitored using the SNMP-based Redline ClearView
NMS. The Redline Management Suite is a set of applications designed to assist
provisioning, monitoring and administration of the Redline components deployed in
Radio Access Networks (RANs). Contact your Redline representative or visit the Redline
website for further information about the Redline ClearView NMS application.

Telnet (CLI)

Use a standard Telnet client to access all settings and statistics necessary to configure
and monitor the operation of the Edge. Use the following steps to monitor and configure
the Edge.
Using CLI, open a Telnet session to the unit IP address.
When the command prompt screen appears, login to the Edge. The factory default
credentials are:
username: admin
password: admin
The Telnet session is logged out automatically when no commands are received (idle)
for a period of ten minutes. Use the following command to exit immediately from the CLI:
logout [ENTER]
The Edge supports two concurrent Telnet sessions. The first admin session opened has
full read/write capabilities. If a second session is opened, it has read-only access.

Web Browser (HTTP)

Use a standard Web browser to access all settings and statistics necessary to configure
and monitor the operation of the Edge. To monitor and configure the Edge using HTTP,
open a Web browser (Internet Explorer 6 or higher recommended) and enter the unit IP
address. For new systems, the default IP address is 192.168.25.2. The following login
dialog should be displayed:
The default username is 'admin' and the default password is 'admin'. There is no logout
command on the Web interface.
70-00204-01-01
INSTALLATION GUIDELINES
Proprietary Redline Communications © 2015
Page 18 of 56
May 19, 2015

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents