Table of Contents
Advertisement
5.3.2
Clear
Use the clear command to delete all IDs from an ID table.
PTP
PMP
√
5.3.3
Del
Use the del command to delete a specific ID or security key/certificate.
PTP
PMP
√
√
5.3.4
Enable
Use the enable command to re-enable a specific ID (that was disabled).
PTP
PMP
√
70-00072-01-07
AN-80i
Table 22: CLI - clear
Parameter/Description
Enter this command to delete all IDs from an ID table.
clear <idtable>
idtable - Clear all the IDs
Table 23: CLI - del
Parameter/Description
del <id>
Remove a group, connection, or link id.
id number <integer>
Unique number for group, connection, or link.
Del <file>
file <name> <mode>
Remove a file from flash and runtime memory.
File name on server. File name must be one of the
<name>
following:
dsa_key_<mac>.pem
rsa_key_<mac>.pem
ssl_cert_<mac>.pem
ssl_key_<mac>.pem
usr_wcert_<mac>.der*
usr_wkey_<mac>.der*
usr_wacert_<mac>.der*
certificate
The <mac> portion is the MAC address of the board.
For example: dsa_key_00-09-02-00-01-02.pem
Can be 'usr' or 'factory'. Defaults to 'usr' if mode is not
<mode>
specified.
*Not used in v3.00 software release.
Table 24: CLI - enable
Parameter/Description
enable
<id>
- [id number]
Proprietary Redline Communications © 2008
&
DSA key used for SSH.
RSA Key used for SSH.
SSL Certificate.
SSL Key.
User wireless certificate.
User wireless key.
User
Page 68 of 106
User
Manual
wireless
authority
Sept 18, 2008
Advertisement
Table of Contents
