Logout; 5.3.10 New; 5.3.11 Ping; 5.3.12 Reboot - Redline RedCONNEX RedACCESS AN-80IE User Manual

5.3.9

Logout

Use the logout command to terminate the current Telnet session.
PTP PMP
√

5.3.10 New

Use the new command to create a new link, group, or connector ID.
PTP PMP
√

5.3.11 Ping

Use the ping command to initiate an ICMP ping command from the AN-80i.
PTP PMP
√

5.3.12 Reboot

Use the reboot command to reboot the AN-80i.
PTP PMP
√ √

5.3.13 Reset

Use the reset command to set all AN-80i statistics values to zero.
PTP PMP
√ √
70-00072-01-07
AN-80i

Table 29: CLI - logout

Parameter/Description
Terminate the current Telnet session.
new

Table 30: CLI - new

Parameter/Description
new
<id_type> - [link | group | conn]
<id> - <id number>

Table 31: CLI - ping

Parameter/Description
ping
<address> - Target IP address
<count> - Number of ICMP packets to send [1..16].

Table 32: CLI - reboot

Parameter/Description
reboot <seconds> Time to reboot the AN-80i.
<seconds> Time in seconds (0 cancels previous reboot command).

Table 33: CLI - reset

Parameter/Description
stats: Reset the AN-80i statistics counters.
reset stats <Enter>
Proprietary Redline Communications © 2008
&
Page 72 of 106
User
Manual
Sept 18, 2008