Statistics Screens; Link Statistics; Figure 32: Pmp - Link Statistics Screen - Redline RedCONNEX RedACCESS AN-80IE User Manual

Table of Contents

Advertisement

4.6

Statistics Screens

4.6.1

Link Statistics

The
Link Statistics
the menu and then click
General
Link Name: User-assigned name for this link.
Link ID: Unique number identifying this link.
Peer MAC: MAC Address of the subscriber.
Active: Indicates if wireless link is operational (Active=YES).
Link Up Time: Total time the wireless link has been operational.
Link lost Count: Number of times link has been out of service.
Status Code: Code indicating the condition of the AN-80i system. Status indications are
specific for PMP and PTP operation.
Configured
Wireless
The following statistics are displayed for both uplink and downlink.
Burst Rate: The current uncoded burst rate for the link.
RSSI: RSSI measured since the last screen refresh.
SINADR: Average signal to interference, noise, and distortion ratio measured since the last
screen refresh.
Lost Frames: Number of frames lost.
70-00072-01-07
screen is accessible only from the
to display the statistics screen.
Status

Figure 32: PMP - Link Statistics Screen

: The number of
Connections
Proprietary Redline Communications © 2008
&
AN-80i
Links
configured on this link.
Connections
User
Manual
browse screen. Click
Page 60 of 106
Sept 18, 2008
in
Links

Advertisement

Table of Contents
loading

Related Products for Redline RedCONNEX RedACCESS AN-80IE

This manual is also suitable for:

Redconnex redaccess an-80i

Table of Contents