Table of Contents
Advertisement
4.6.4
System Status - PMP Wireless Statistics
Click
System Status
interface statistics. The sector controller status screen includes information about the
PMP deployment.
Configured Stations: This is the number of
Configured Connections: The number of
Active Wireless Links: The number of registered subscribers.
Active Wireless Connections: The number of connections to registered subscribers.
For all other statistics, refer to Wireless Statistics on page 26.
4.7
Quick Configuration Guide
This procedure is to aid configuring point-to-multipoint (PMP) operation on AN-80i
systems. For complete installation and operational procedures. refer to the AN-80i
System User Manual, the AN-80i Quick Install Guide, and the Installation Guidelines
provided on CD-ROM.
The VLAN tagging feature allows the user to configure and operate an AN-80i
deployment as a VLAN-aware wireless switch. A 'group' is created at the sector
controller for each VLAN to be transported, and 'connections' are added to enable data
flow with any subscriber station participating in that VLAN. If VLAN is not required, a
default group and set of connections must be setup to define the traffic characteristics.
Prior to completing this setup, no Ethernet data traffic can be transmitted over the
wireless interface.
The procedures provided below include steps to setup a basic working configuration for
initial testing, and then to introduce VLAN traffic controls.
70-00072-01-07
&
AN-80i
in the menu to view system, Ethernet statistics, and wireless
Figure 35: PMP - System Status Screen
Proprietary Redline Communications © 2008
defined (to subscribers).
Links
defined for all subscribers.
Connections
Page 63 of 106
User
Manual
Sept 18, 2008
Advertisement
Table of Contents
