ICP DAS USA VPD Series User Manual page 103

TPD/VPD Series HMI Device User Manual
Step 8: Verify that the information for M-7060 module is correct (e.g., the Device Name, Net ID,
Tag Name, IO Type, Start Address and Default Value, etc.) and then click the "OK" button to save the
configuration and close the "Devices" dialog box.
For more detailed information regarding the Self-test process, which is used to confirm that

the M-7060 and TouchPAD are operating correctly, refer to
accessed using a TouchPAD.
If you use a third-party Modbus RTU Slave device, refer to

Modbus RTU slave device using a TouchPAD
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
FAQ: How can the M-7060 be
FAQ: How do I access a third-party
for more detailed information.
Page: 103