ICP DAS USA VPD Series User Manual page 32

TPD/VPD Series HMI Device User Manual
7. PoE and Ethernet RJ-45 Jack
The TouchPAD device is equipped with an RJ-45 jack that is used as the 10/100
Base-TX Ethernet port and features networking capabilities. When an Ethernet link is
detected and an Ethernet packet is received, the Act LED (Green) indicator will be
illuminated. When power is supplied via PoE (Power-over-Ethernet), the PoE LED
(Orange) indicator will be illuminated.
8. Power/GND/RS-232/RS-485 Connector
The TouchPAD device is equipped with a removable terminal block connector is
designed for easy and robust wiring. For more detailed information regarding the pin
assignments, refer to
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
Section 2.2.4 TPD-703 Series Models.
Page: 32