ICP DAS USA VPD Series User Manual page 78

TPD/VPD Series HMI Device User Manual
Follow the procedure described below:

Step 1: Attach a power supply to the TouchPAD device. Refer to
TouchPAD" for more details.
Step 2: Connect the TouchPAD device to the same hub or the same sub-network as the Host PC
using an Ethernet cable.
Note that if you use PoE power supply to TouchPAD device, please keep the original network
wiring.
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
Section 3.3 "Supply Power to the
Page: 78