Table of Contents
Advertisement
TPD/VPD Series HMI Device User Manual
2.1.3 TPD-430/433 Series Models
Models supported include TPD-430, TPD-430-H, TPD-430-EU, TPD-430-H-EU, TPD-433, TPD-433-H,
TPD-433-EU and TPD-433-H-EU.
1.
Programmable LED Indicator
2.
4.3" TFT LCD with Touch Panel
3.
Buzzer
4.
Headphone Jack
5.
USB Port
The USB Port is used to downloading application programs.
6.
Power/GND/RS-485 Connector
The TouchPAD device is equipped with a removable terminal block connector is
designed for easy and robust wiring. For more detailed information regarding the pin
assignments, refer to
7.
PoE and Ethernet RJ-45 Jack
The TouchPAD device is equipped with an RJ-45 jack that is used as the 10/100 Base-TX
Ethernet port and features networking capabilities. When an Ethernet link is detected
and an Ethernet packet is received, the Act LED (Green) indicator will be illuminated.
When power is supplied via PoE (Power-over-Ethernet), the PoE LED (Orange) indicator
will be illuminated.
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
(for TPD-430/430-EU only)
Section 2.2.1 TPD-280/283/430/433 Series
(for TPD-433/433-EU/433-H/433-H-EU only)
Models.
Page: 27
Advertisement
Table of Contents
