ICP DAS USA VPD Series User Manual page 82

TPD/VPD Series HMI Device User Manual
Step 8: Verify that "Host IP Address" and "TouchPAD IP Address" in the same subnet.
Step 9: Verify that "TouchPAD MAC Address" must match the MAC Address of your TouchPAD
device, and click the "OK" button.
Note: You can find the MAC
address on the back of the TouchPAD
Note: Verify that the new project has been created (see Section 3.2 "Create a New Project in
the HMIWorks").
Step 10: Click the "Run (Build &
Download) F9" item from the
"Run (Build & Download)" menu,
or press F9.
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. Page: 82