TPD/VPD Series HMI Device User Manual
Step 3: Use a flat-head screwdriver to set the Rotary Switch on the TouchPAD device to "Update OS"
mode (position 1) and power off then power on the TouchPAD.
Note that the default configuration
is "Run" mode (position 0).
Step 4: Connect the TouchPAD device to the Host PC using a CA-USB10 cable.
Step 5: In the "Update MiniOS8" dialog box, click the "Update" button to start update.
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
Page: 90