TPD/VPD Series HMI Device User Manual
Step 8: Verify that the information for PET-7060 module is correct (e.g., the Device Name, Net ID,
Tag Name, IO Type, Start Address and Default Value, etc.) and then click the "OK" button to save the
configuration and close the "Devices" dialog box.
For more detailed information regarding the Self-test process, which is used to confirm that
the PET-7060 and TouchPAD are operating correctly, refer to
accessed using a
TouchPAD.
If you use a third-party Modbus TCP Slave device, refer to
Modbus TCP slave device using a TouchPAD
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
FAQ: How can the PET-7060 be
FAQ: How do I access a third-party
for more detailed information.
Page: 99