Table of Contents
Advertisement
TPD/VPD Series HMI Device User Manual
3.3.2 PoE Power Supply
When using PoE devices such as the TPD-283(-H)/283U(-H)/283(U)-Mx, TPD-433(-H)/433(-H)-EU/
433F(-H)/433-M2/703(-64)
incorporate the ICP DAS "PoE" switch, the "NS-205PSE", as the power source. The NS-205PSE
automatically detects any connected devices, whether they are PoE devices or not. This mechanism
ensures that the NS-205PSE will function simultaneously with both PoE and non-PoE devices.
Note:
1. When acting as a power source for a PoE device, the NS-205PSE
requires a power input ranging from +46 V
2. PoE (Power over Ethernet) means that the Ethernet cable conveys
not only data but also power.
Step 1: Connect both the TouchPAD device and the Host PC to the same sub network or use a Power
over Ethernet Switch (e.g., an NS-205PSE) and supply power to the TouchPAD device via the PoE
Switch.
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
and
VPD-133(N)(-H)/143(N)(-H)/173N(-64)/173X(-64),
to +55 V
DC
.
DC
Note that either "Ethernet" or "PoE"
uses the same common Ethernet cable.
you
can
Page: 70
Advertisement
Table of Contents
