Table of Contents
Advertisement
TPD/VPD Series HMI Device User Manual
Step 5: In the "New/Edit Connection..." dialog box, configure the connection information of the
PET-7060 module as follows:
Step 6: Click the "Search" button to open the "Select [PET-7000] Series..." dialog box.
Step 7: In the "Select [PET-7000] Series..." dialog box, select the model name (e.g., PET-7060) and
then click the "OK" button.
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
1. Enter a name for the connection (e.g.,
TCP_1) in the "Connection Name"
field.
2. Select "TCPIP" from the "Connection
Interface" drop down menu.
3. Enter the IP Address of the PET-7060
module in the "IP Address" field.
4. Enter the TCP Port of the PET-7060
module in the "Port" field.
5. Click the "OK" button to save the
configuration.
Page: 98
Advertisement
Table of Contents
