Zuld Configuration - ZyXEL Communications XGS4600 Series User Manual

Table 192 Advanced Application > ZULD Status (continued)
LABEL
Remote MAC Addr
Remote Port

44.3 ZULD Configuration

Use this screen to enable ZULD on a port, configure a mode and set the probe time. To open this screen,
click Advanced Application > ZULD > Configuration.
Figure 341 Advanced Application > ZULD > Configuration (Standalone Mode)
Chapter 44 ZULD
DESCRIPTION
This is the MAC address of the port on the connected device to which the port of the
Switch is connected.
This is the port number of the port on the connected device to which the port of the Switch
is connected.
XGS4600 Series User's Guide
425