ZyXEL Communications XGS4600 Series User Manual page 68

Chapter 6 Tutorials
Figure 45 Tutorial: Set the DHCP Server Port to Trusted
Go to Advanced Application > IP Source Guard > IPv4 Source Guard Setup > DHCP Snooping >
7
Configure > VLAN, show VLAN 100 by entering 100 in the Start VID and End VID fields and click Apply.
Then select Yes in the Enabled field of the VLAN 100 entry shown at the bottom section of the screen.
If you want to add more information in the DHCP request packets such as source VLAN ID or system
name, you can also select an Option82 Profile in the entry.
Figure 46 Tutorial: Enable DHCP Snooping on this VLAN
XGS4600 Series User's Guide
68