ZyXEL Communications XGS4600 Series User Manual page 327

Figure 253 Advanced Application > IP Source Guard > IPv6 DHCP Trust Setup (Standalone Mode)
Figure 254 Advanced Application > IP Source Guard > IPv6 DHCP Trust Setup (Stacking Mode)
The following table describes the labels in this screen.
Table 142 Advanced Application > IP Source Guard > IPv6 DHCP Trust Setup
LABEL DESCRIPTION
Trust Setting
Active Select this to specify whether ports are trusted or untrusted ports for DHCP snooping. If you do
not select this then IPv6 DHCP Trust is not used and all ports are automatically trusted.
Port Setting
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port This field displays the port number. In stacking mode, the first number represents the slot ID and
the second is the port number. Please note that the default stacking ports (the last two ports
of your Switch) cannot be configured. They are reserved for stacking only.
Chapter 29 ARP Inspection
XGS4600 Series User's Guide
327