50.3 IPv4 OSPF Status
Use this screen to view current IPv4 OSPF status. Click IP Application > OSPF > IPv4 OSPF the navigation
panel to display the screen as shown next. See
Figure 359 IP Application > OSPF > IPv4 OSPF > OSPF Status
The following table describes the labels in this screen.
Table 206 IP Application > OSPF > IPv4 OSPF > OSPF Status
LABEL
OSPF
Interface
Neighbor
Link State
Database
Poll Interval(s)
Stop
DESCRIPTION
This field displays whether OSPF is activated (Running) or not (Down).
The text box displays the OSPF status of the interfaces on the Switch.
The text box displays the status of the neighboring router participating in the OSPF network.
The text box displays information in the link state database which contains data in the LSAs.
The text box displays how often (in seconds) this screen refreshes. You may change the refresh
interval by typing a new number in the text box and then clicking Set Interval.
Click Stop to end OSPF status polling.
XGS4600 Series User's Guide
Section 50.1 on page 448
451
for more information on OSPF.