ZyXEL Communications XGS4600 Series User Manual page 595

Figure 486 Management > Port Status > Port Details (Stacking Mode)
The following table describes the labels in this screen.
Table 288 Management > Port Status > Port Details
LABEL DESCRIPTION
Port Info
Port NO. This field displays the port number you are viewing. In stacking mode, the first number represents
the slot and the second the port number.
Name This field displays the name of the port.
Link This field displays the speed (such as 100M for 100Mbps, 1G for 1000 Mbps or 1 Gbps, or 10G for 10
Gbps) and the duplex (F for full duplex). It also shows the cable type (Copper or Fiber) for the
combo ports. This field displays Down if the port is not connected to any device.
State If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port.
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays STOP.
When LACP (Link Aggregation Control Protocol), STP, and dot1x are in blocking state, it displays
Blocking.
LACP This field shows if LACP is enabled on this port or not.
TxPkts This field shows the number of transmitted frames on this port.
RxPkts This field shows the number of received frames on this port.
Chapter 71 Port Status
XGS4600 Series User's Guide
595