ZyXEL Communications XGS4600 Series User Manual page 291

Layer 3 managed stackable gigabit ethernet switch
Hide thumbs Also See for XGS4600 Series:
Table of Contents

Advertisement

• Assign account privilege levels (See the CLI Reference Guide for more information on account
privilege levels) for the authenticated user.
The VSAs are composed of the following:
• Vendor-ID: An identification number assigned to the company by the IANA (Internet Assigned
Numbers Authority). Zyxel's vendor ID is 890.
• Vendor-Type: A vendor specified attribute, identifying the setting you want to modify.
• Vendor-data: A value you want to assign to the setting.
Note: Refer to the documentation that comes with your RADIUS server on how to configure
VSAs for users authenticating through the RADIUS server.
The following table describes the VSAs supported on the Switch. Note that these attributes only work
when you enable authorization (see
Table 117 Supported VSAs
FUNCTION
Ingress Bandwidth
Assignment
Egress Bandwidth
Assignment
Privilege Assignment
26.6.1.1 Tunnel Protocol Attribute
You can configure tunnel protocol attributes on the RADIUS server (refer to your RADIUS server
documentation) to assign a port on the Switch to a VLAN based on IEEE 802.1x authentication. The port
VLAN settings are fixed and untagged. This will also set the port's VID. The following table describes the
values you need to configure. Note that these attributes only work when you enable authorization (see
Section 26.5 on page
Chapter 26 AAA
Section 26.5 on page
ATTRIBUTE
Vendor-Id = 890
Vendor-Type = 1
ingress rate (Kbps in decimal format)
Vendor-data =
Vendor-Id = 890
Vendor-Type = 2
egress rate (Kbps in decimal format)
Vendor-data =
Vendor-ID = 890
Vendor-Type = 3
Vendor-Data = "shell:priv-lvl=N"
or
(CISCO)
Vendor-ID = 9
(CISCO-AVPAIR)
Vendor-Type = 1
Vendor-Data = "shell:priv-lvl=N"
where
is a privilege level (from 0 to 14).
N
Note: If you set the privilege level of a login account differently on the RADIUS
servers and the Switch, the user is assigned a privilege level from the
database (RADIUS or local) the Switch uses first for user authentication.
288).
XGS4600 Series User's Guide
291
288).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xgs4600-32Xgs4600-32fXgs4600-52f

Table of Contents