What You Can Do; Cluster Management Status - ZyXEL Communications XGS4600 Series User Manual

63.1.1 What You Can Do

• Use the Cluster Management Status screen
within the cluster and to access a cluster member Switch's Web Configurator.
• Use the Clustering Management Configuration screen
clustering management.

63.2 Cluster Management Status

Use this screen to view the role of the Switch within the cluster and to access a cluster member Switch's
Web Configurator.
Click Management > Cluster Management in the navigation panel to display the following screen.
Note: A cluster can only have one manager.
Figure 466 Management > Cluster Management Status
The following table describes the labels in this screen.
Table 275 Management > Cluster Management Status
LABEL
Status
Manager
The Number of
Member
Index
MacAddr
Name
Model
Status
DESCRIPTION
This field displays the role of this Switch within the cluster.
Manager
Member (you see this if you access this screen in the cluster member Switch directly and not
through the cluster manager)
None (neither a manager nor a member of a cluster)
This field displays the cluster manager Switch's hardware MAC address.
This field displays the number of switches that make up this cluster. The following fields describe
the cluster member switches.
You can manage cluster member switches through the cluster manager Switch. Each number in
the Index column is a hyperlink leading to the cluster member Switch's Web Configurator.
This is the cluster member Switch's hardware MAC address.
This is the cluster member Switch's System Name.
This field displays the model name.
This field displays:
Online (the cluster member Switch is accessible)
Error (for example the cluster member Switch password was changed or the Switch was set as
the manager and so left the member list, and so on)
Offline (the Switch is disconnected – Offline shows approximately 1.5 minutes after the link
between cluster member and manager goes down)
XGS4600 Series User's Guide
(Section 63.2 on page
(Section 63.3 on page
569
569) to view the role of the Switch
570) to configure