ZyXEL Communications XGS4600 Series User Manual page 385

Chapter 40 Link Layer Discovery Protocol (LLDP)
The following table describes the labels in Basic TLV part of the screen.
Table 173 Advanced Application > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Basic
TLV)
LABEL DESCRIPTION
Local Port This displays the number of the Switch's port to which the remote device is connected. In
stacking mode, the first number represents the slot and the second the port number.
Basic TLV
Chassis ID TLV • Chassis ID Subtype – this displays how the chassis of the remote device is identified.
• Chassis ID – this displays the chassis ID of the remote device. The chassis ID is identified by
the chassis ID subtype.
Port ID TLV • Port ID Subtype – this displays how the port of the remote device is identified.
• Port ID – this displays the port ID of the remote device. The port ID is identified by the port
ID subtype.
Time To Live TLV This displays the time-to-live (TTL) multiplier of LLDP frames. The device information on the
neighboring devices ages out and is discarded when its corresponding TTL expires. The TTL
value is to multiply the TTL multiplier by the LLDP frames transmitting interval.
Port Description This displays the remote port description.
TLV
System Name This displays the system name of the remote device.
TLV
System This displays the system description of the remote device.
Description TLV
System This displays whether the system capabilities are enabled and supported on the remote
Capabilities TLV
device.
• System Capabilities Supported
• System Capabilities Enabled
Management This displays the management address of the remote device.
Address TLV
• Management Address Subtype
• Management Address
• Interface Number Subtype
• Interface Number
• Object Identifier
XGS4600 Series User's Guide
385