ZyXEL Communications XGS4600 Series User Manual page 549

Table 266 SNMP System Traps (continued)
OPTION OBJECT LABEL
loginrecord zyAccessControlLoginRecord
zyAccessControlLogoutRecord 1.3.6.1.4.1.890.1.15
zyAccessControlLoginFail
stacking zyStackingChannelUp
zyStackingChannelDown
zyStackingSlotAttach
zyStackingSlotDetach
zyStackingNewMaster
zyStackingUpgradeFirmwareF
ail
zyStackingNewBackup
zyStackingBackupTakeover
zyStackingNewMasterFromTak
eover
zyStackingSyncConfFail
zyStackingSysRestoreConfFail
zyStackingSlotInitFail
zyStackingSlotChangeIndex
zyStackingPriorityChange
zyStackingTopologyChange
Table 267 SNMP Interface Traps
OPTION OBJECT LABEL
linkup linkUp
linkdown linkDown
Chapter 59 Access Control
OBJECT ID
1.3.6.1.4.1.890.1.15
.3.9.4.1
.3.9.4.2
1.3.6.1.4.1.890.1.15
.3.9.4.3
1.3.6.1.4.1.890.1.15
.3.97.4.1
1.3.6.1.4.1.890.1.15
.3.97.4.2
1.3.6.1.4.1.890.1.15
.3.97.4.3
1.3.6.1.4.1.890.1.15
.3.97.4.4
1.3.6.1.4.1.890.1.15
.3.97.4.5
1.3.6.1.4.1.890.1.15
.3.97.4.6
1.3.6.1.4.1.890.1.15
.3.97.4.7
1.3.6.1.4.1.890.1.15
.3.97.4.8
1.3.6.1.4.1.890.1.15
.3.97.4.9
1.3.6.1.4.1.890.1.15
.3.97.4.10
1.3.6.1.4.1.890.1.15
.3.97.4.11
1.3.6.1.4.1.890.1.15
.3.97.4.12
1.3.6.1.4.1.890.1.15
.3.97.4.13
1.3.6.1.4.1.890.1.15
.3.97.4.14
1.3.6.1.4.1.890.1.15
.3.97.4.15
OBJECT ID
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.3
XGS4600 Series User's Guide
549
DESCRIPTION
This trap is sent when users log in.
This trap is sent when users log out.
This trap is sent when users fail in login.
This trap is sent when stacking channel
changes from down to up.
This trap is sent when stacking channel
changes from up to down.
This trap is sent when a Switch is attached
successfully into the stacking system.
This trap is sent when a Switch is detached
from a stacking system.
This trap is sent when a Switch is selected as
the new master in stacking system.
This trap is sent when upgrade firmware fails
on a stacked Switch.
This trap is sent when a Switch is selected as
the new backup in stacking system.
This trap is sent when a master Switch is loss
and replaced by a backup to become the
new master.
This trap is sent when a new master Switch
takes over from a former master.
This trap is sent when a configuration sync
fails.
This trap is sent when a backup Switch
becomes the master and configuration
restore fails.
This trap is sent when a newly attached
Switch initialization fails.
This trap is sent when a stacking slot index
changes.
This trap is sent when the stacking priority
changes. Stacking priority determines which
is master.
This trap is sent when a stacking topology
(ring or chain) changes.
DESCRIPTION
This trap is sent when the Ethernet link is up.
This trap is sent when the Ethernet link is
down.