ZyXEL Communications XGS4600 Series User Manual page 401

Chapter 40 Link Layer Discovery Protocol (LLDP)
Table 181 Advanced Application > LLDP > LLDP-MED Location (continued)
LABEL DESCRIPTION
Altitude Enter the altitude information. The value should be from –2097151 to 2097151 in meters or in
floors.
• meters
• floor
Datum Select the appropriate geodetic datum used by GPS.
• WGS84
• NAD83-NAVD88
• NAD83-MLLW
Civic Address Enter the Civic Address by providing information such as Country, State, County, City, Street,
Number, ZIP code and other additional information. Enter at least 2 fields in this configuration
including the Country. The valid length of the Country field is 2 characters and all other fields
are up to 32 characters.
• Country
• State
• County
• City
• Division
• Neighbor
• Street
• Leading-Street-Direction
• Street-Suffix
• Trailing-Street-Suffix
• House-Number
• House-Number-Suffix
• Landmark
• Additional-Location
• Name
• Zip-Code
• Building
• Unit
• Floor
• Room-Number
• Place-Type
• Postal-Community-Name
• Post-Office-Box
• Additional-Code
ELIN Number Enter a numerical digit string, corresponding to the ELIN identifier which is used during
emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. The valid length is
from 10 to 25 characters.
Add Click Add after finish entering the location information.
Cancel Click Cancel to begin entering the location information afresh.
Index This lists the index number of the location configuration. Click an index number to view or edit
the location.
Port This lists the port number of the location configuration. In stacking mode, the first number
represents the slot and the second the port number.
Location This field displays the location configuration information based on geographical coordinates
Coordinates that includes longitude, latitude, altitude and datum.
Civic Address This field displays the Civic Address for the remote device using information such as Country,
State, County, City, Street, Number, ZIP code and additional information.
XGS4600 Series User's Guide
401