ZyXEL Communications XGS4600 Series User Manual page 74

Setting up the Switch
Open the Web Configurator. Go to the Management > Maintenance screen, and click the Click Here
1
button next to the Auto Configuration field.
Figure 54 Tutorial: Auto Configuration Screen
Select the check box in the Active field to enable auto configuration. Select DHCP in the Mode field,
2
and enter the VLAN ID where the DHCP server belongs to in the DHCP VLAN ID field. Click Apply to save
your changes.
Figure 55 Tutorial: Enable Auto Configuration
Go to the Basic Setting > IP Setup > IP Configuration screen. Select the check box in the DHCP Client
3
field.
If you want to load the auto configuration file with DHCP option 60 enabled and a Vendor Class
4
Identifier assigned when you reboot the Switch, follow the instruction below. Otherwise, skip this step. In
the Basic Setting > IP Setup > IP Configuration screen, select the check box in the Option-60 field, and
enter a Vendor Class Identifier in the Class-ID field. In this example, we use "ZyxelCorp". Click Apply to
save your changes.
Chapter 6 Tutorials
XGS4600 Series User's Guide
74