HIKVISION DS-2DP1618ZIXS-DE User Manual page 43

The camera focuses automatically at any time according to objects in the scene.

Semi-auto:
The camera focuses automatically only once after panning, tilting and zooming.

Manual:
In Manual mode, you need to use
 Min. Focus Distance
This function is used to limit the minimum focus distance.
Note:
Focus settings applies only to PTZ camera channel.
Day/Night Switch
 Day/Night Switch
The Day/Night Switch mode can be set to Auto, Day, Night, and Scheduled-Switch.

Auto:
In Auto mode, the day mode and night mode can switch automatically according to the light
condition of environment. The switching sensitivity can be set to Low, Normal, High.

Day:
In Day mode, the camera displays color image. It is used for normal lighting conditions.

Night:
In Night mode, the image is black and white. Night mode can increase the sensitivity in low light
conditions.
 Scheduled-Switch
In Scheduled-Switch mode, you can set the time schedule for day mode as shown in Figure 3-10.
The rest time out of the schedule is for night mode.
 Smart Supplement Light
If the light supplement is on and the image center is overexposure, you can enable this function.
 IR Light Mode
IR light mode can be set to Auto and Manual.

Auto: The brightness of the infrared light will be adjusted automatically. IR Light Sensitivity
value ranges from 0 to 100. Trigger Mode can be set to Camera or Photosensitive.

Manual: you need to adjust the brightness value of infrared light manually. Brightness Limit
value ranges from 0 to 100.
Notes:
 This function varies depending on different camera models.
 The IR related functions are supported by the IR camera only.
User Manual of PanoVu Series Network Camera
on the control panel to focus manually.
Auto Mode Sensitivity
Figure 3-9
Day Night Schedule
Figure 3-10
36