HIKVISION DS-2DP1618ZIXS-DE User Manual page 54

For convenient preset selection, refer to the following steps to navigate to the preset you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
Note:
The following presets are predefined with special commands. You can only call them but not configure
them. For instance, preset 99 is the "Start auto scan". If you call the preset 99, the camera starts auto
scan function.
Preset
33
34
35
36
37
38
39
40
41
42
43
44
45
92
User Manual of PanoVu Series Network Camera
Figure 4-2
Table 4-1
Function
Auto flip
Back to initial position
Call patrol 1
Call patrol 2
Call patrol 3
Call patrol 4
Day mode (IR cut filter in)
Night mode (IR cut filter out)
Call pattern 1
Call pattern 2
Call pattern 3
Call pattern 4
One-touch patrol
Set manual limits
Figure 4-3
Calling a Preset
Special Presets
Preset Function
93 Save manual limits
94 Remote reboot
95 Call OSD menu
96 Stop a scan
97 Start random scan
98 Start frame scan
99 Start auto scan
100 Start tilt scan
101 Start panorama scan
102 Call patrol 5
103 Call patrol 6
104 Call patrol 7
105 Call patrol 8
Special Preset
47