Table of Contents
Advertisement
To port mapping with the customized port numbers:
Choose
And you can customize the value of the port No. by yourself.
4. Click
2.2.2 Advanced Settings
Configuring SNMP Settings
Purpose:
You can use SNMP to get camera status and parameters related information.
Before you start:
Before setting the SNMP, use the SNMP software and manage to receive the camera information via
SNMP port. By setting the Trap Address, the camera can send the alarm event and exception messages
to the surveillance center.
Note:
The SNMP version you select should be the same as that of the SNMP software.
Steps:
1. Enter the SNMP settings interface:
Configuration > Network > Advanced Settings > SNMP
User Manual of PanoVu Series Network Camera
Configure the Port No.
Figure 2-7
to save the settings.
19
Advertisement
Table of Contents
