Behavior Analysis; Configuring Overlay & Capture - HIKVISION DS-2DP1618ZIXS-DE User Manual

9. Click
Surveillance Center, Send Email, Upload to FTP, Trigger Channel, Smart Tracking and Trigger Alarm
Output are selectable. Refer to Section 6.1.1 Configuring Motion Detection for more details.
Click

6.3 Behavior Analysis

Purpose:
Multiple rules can be configured for different requirements to do intelligent analysis.
Note:
Behavior analysis is only available for panoramic camera channel. If the camera supports more than
one panoramic channel, select a channel and start configuration.
6.3.1 Configuring Overlay & Capture
Steps:
1. Enter the Behavior Analysis configuration interface:
Configuration > Behavior Analysis > Overlay & Capture
2. Set the display information:
 Display VCA info. on Stream: The green frames will be displayed on the target if in a live view or
playback.
 Display Target info. on Alarm Picture: There will be a frame on the target on the uploaded alarm
picture if the checkbox is checked.
 Display Rule info. on Alarm Picture: The captured target and the configured area will be framed
on the alarm picture.
User Manual of PanoVu Series Network Camera
tab to select the linkage method taken for the object removal alarm, Notify
button to save the settings.
Figure 6-19 Overlay & Capture
87