HIKVISION DS-2DP1618ZIXS-DE User Manual page 34

Check the Enable ***CGI checkbox and then select the authentication from the drop-down list.
Then you can access to the camera through the third party platform.
 ONVIF
Steps:
1. Check the Enable ONVIF checkbox to enable the function.
2. Click Add to add a new ONVIF user. Set the user name and password, and confirm the
password. You can set the user as media user, operator, and administrator.
3. Click Modify to modify the information of the added ONVIF user.
4. Click Delete to delete the selected ONVIF user.
5. Save the settings.
Note:
User settings of ONVIF are cleared when you restore the camera.
Network Service
Purpose:
You can control the ON/OFF status of certain protocol that the camera supports.
Notes:
Supported services vary according to camera models.
Keep unused function OFF for security concern.
 WebSocket or WebSockets protocol are used for plug-in-free live view.
When you use Google Chrome 57 and its above version or Mozilla Firefox 52 and its above
version to visit your camera, you should enable WebSocket or Websokets protocol. Otherwise,
live view function is not usable.
If the camera uses HTTP, enable WebSocket.
If the camera uses HTTPS, enable WebSockets.
 SDK Service and Enhanced SDK Service
If you want to add the device to the client software, you should enable SDK Service or
Enhanced SDK Service.
SDK Service: SDK protocol is used.
Enhanced SDK Service: SDK over TLS protocol is used. Communication between the device and
the client software is secured by using TLS (Transport Layer Security) protocol.
 TLS (Transport Layer Security)
The device offers TLS 1.1 and TLS 1.2. Enable one or more protocol versions according to your
need.
User Manual of PanoVu Series Network Camera
27