Advanced Configuration - HIKVISION DS-2DP1618ZIXS-DE User Manual

1. Check Enable Data Uploading checkbox, and the data of people density detection will be uploaded
to surveillance center.
2. Check Enable Picture Uploading checkbox, the alarm will be uploaded to surveillance center with
pictures.
3. Set Uploading Mode. Scheduled Uploading and Instant Uploading are selectable.
 Scheduled Uploading: The detection data and pictures can be uploaded to surveillance center
at certain time interval.
Check Scheduled Uploading checkbox to enable the function, and select a Statistics Cycle from
the dropdown list.
 Instant Uploading: Once the level of people density changes, the detection data and pictures
will be uploaded to surveillance center immediately.
Check Instant Uploading checkbox to enable the function.
4. Configure HTTP Data Transmission. Input IP address, URL and Port, then click Test to test if it
succeeds.
5. Click Save to save the settings.

6.5.3 Advanced Configuration

Configure the overlay information displayed on live image.
Steps:
1. Check Display Rule Info. on Stream to enable this function.
2. Choose Flow Overlay from the dropdown list, None, Level, Number of People, and Number of
People/Level are selectable.
3. Edit Region Name for every detection area you set before.
4. Click Save to save the settings.
User Manual of PanoVu Series Network Camera
Advanced Configuration
Figure 6-36
99