HIKVISION DS-2DP1618ZIXS-DE User Manual page 45


Outdoor
You can select this mode when the camera is installed in outdoor environment.

Indoor
You can select this mode when the camera is installed in indoor environment.

Fluorescent Lamp
You can select this mode when there are fluorescent lamps installed near the camera.
 Sodium Lamp
You can select this mode when there are sodium lamps installed near the camera.
 Auto-Tracking
In Auto-Tracking mode, white balance is continuously being adjusted in real-time according to the color
temperature of the scene illumination.
Image Enhancement
 Digital Noise Reduction
The digital noise reduces function processes the noise in the video signal.
You can set Digital Noise Reduction function to Normal and adjust the Noise Reduction Level as shown
in Figure 3-13. The level ranges from 0 to 100.
If you are a professional technician, you can set it to Expert Mode then adjust Space DNR Level and
Time DNR Level.
 Defog Mode
When there is fog in the image, you can enable this function to get clear image.
 EIS (Electronic Image Stabilization)
The live view image would be trembled and dim when the camera is shocked slightly in some
monitoring conditions. And the electronic image stabilization (EIS) function is used to overcome this
problem to ensure a steady and clear image.
 OIS (Optical Image Stabilization)
You can set the OIS (Optical Image Stabilization) to NORMAL, EXPERT, or OFF as you need. In expert
mode, you can specify OIS level and OIS Sensitivity.
Video Adjustment
 Mirror
If you turn the MIRROR function on, the image will be flipped. It is like the image in the mirror. The flip
direction can be set to OFF, or CENTER.
 Video Standard
You can set the Video Standard to 50 Hz (PAL) or 60 Hz (NTSC) according to the video system in your
country.
User Manual of PanoVu Series Network Camera
Normal Mode
Figure 3-13
Expert Mode
Figure 3-14
38