4) Click the dropdown list in the rule list to select the crossing direction.
5) Enable rules: Check the Enable checkbox of each rule in the rule list to enable the rule.
6) Click
Intrusion
Purpose:
This function can be used for detecting whether there are people, vehicles and objects intrude into
the pre-defined region longer than the set duration. The alarm will be triggered if the rule is
broken.
Steps:
1) Create new rule: Click
2) Select rule type: Click the dropdown list and select Intrusion as the rule type.
3) Configure the rule area:
User Manual of PanoVu Series Network Camera
Figure 6-21 Draw Line
Figure 6-22 Select Crossing Direction
to save the settings.
add a new rule.
Figure 6-23 Select Rule Type
89