Configuring Unattended Baggage Detection - HIKVISION DS-2DP1618ZIXS-DE User Manual

4. Click the
5. Click on the live video to specify the four vertexes of the detection region, and right click to
complete drawing.
Repeat the step to configure other regions. Up to 4 regions can be set. You can click the
button to clear all pre-defined regions.
Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the object which can
trigger the alarm, when the sensitivity is high, a very small object can trigger the alarm.
Detection Target: Set the detection target for the region entrance detection. You can select human,
vehicle, or all (human &vehicle) as the detection target from the dropdown list. If Human is selected,
only human beings will be identified as detection objects and as well as Vehicle.
6. Click
configuration is the same as the settings of the arming schedule for motion detection. Refer to Step
5 in Section 6.1.1 Configuring Motion Detection.
7. Click
surveillance center, send email, upload to FTP, trigger channel, smart tracking and trigger alarm
output are selectable. Refer to Step 3 in Section 6.1.1 Configuring Motion Detection.
8. Click

6.2.6 Configuring Unattended Baggage Detection

Purpose:
Unattended baggage detection function detects baggage which is left in a pre-defined virtual region,
and some certain actions can be taken when the alarm is triggered.
Steps:
1. Enter the Unattended Baggage Detection settings interface:
Configuration> Event > Smart Event> Unattended Baggage Detection
2. Check the checkbox of Enable to enable the Unattended Baggage Detection function.
User Manual of PanoVu Series Network Camera
button to start the region drawing.
tab to enter the arming schedule setting interface. The time schedule
tab to select the linkage method taken for the video loss alarm, Notify
button to save the settings.
Configuring Unattended Baggage Detection
Figure 6-17
84