Steps:
1. Enter the Authentication interface:
Configuration> System> Security > Authentication
2. Select the authentication type. Digest is the recommended safer authentication way.
3. Click
7.3.2 Configuring IP Address Filter
Purpose:
With this function on, the camera allows certain IP addresses whether to log in or not.
Steps:
1. Enter IP Address Filter interface:
Configuration > System > Security > IP Address Filter
2. Check the Enable IP Address Filter checkbox.
3. Select the type of IP Address Filter in the dropdown list, Forbidden and Allowed are selectable.
4. Set the IP Address Filter list.
Add an IP Address
Steps:
(1) Click Add to add an IP.
(2) Input the IP Adreess.
User Manual of PanoVu Series Network Camera
to save the settings.
Figure 7-14
IP Address Filter
109