Advanced Poly-Packaging Advanced Poly-Bagger T-1000-S18H Operation Manual page 9

Continuous Strip Option: Leave bags connected in an "endless" strip or a predetermined number of
strips of sealed bags.
Counters – Preset, Total and Maintenance counters are provided.
Energy Conservation and Component Saver: To extend its life and conserve energy in your plant, the
T-1000-S14 is programmed to sequentially shut down components when not in use for extended periods
of time. Electric current to the heater bar will discontinue and place the T-1000-S14 in Stop mode during
a preset period of nonuse. Shortly thereafter, air flow will be shut off, preserving compressed air. A
screen saver is also provided.
Internal (PLC) and External (USB) Recipe Management System: Stores up to twenty-four recipe
settings internally, or hundreds of recipes externally. Optional Ethernet card can allow for remote recipe
management.
Maintenance Counter / Chart: Periodically check this counter (total machine cycles) to determine
preventative maintenance and component inspection intervals.
Pass Code Protection: Settings screens can be protected from alterations by unauthorized individuals.
Once turned on, this function acts as a "screen save" feature. After a preset amount of time, the pass code
screen will be displayed from the Bagger Operation screen. Factory settings are protected by a Level 1
pass code and should only be accessed by authorized maintenance personnel.
Predetermining Counter: Preset the T-1000-S14 to stop after a predetermined number of bags have been
packaged. Set the quantity of finished bags to complete a work order or fill a shipping container. Once the
work order is complete or the container is full, the T-1000-S14 stops to alert the operator to begin the next
work order or to push aside the box and begin filling another. Pressing anywhere on the screen resets the
counter and starts the bagging operation with minimum delay.
Totalizing Counter: Reset this counter at the beginning of each shift or day to record packaging
production over a period of time.
1.4 System Integration
The T-1000-S14 is preprogrammed to integrate automatically with major brand vibratory counters and
feeders, weigh scales, volumetric fillers, auger fillers and infeed conveyors. As an OEM for numerous
equipment manufacturers of infeed systems, we offer the best available system with the T-1000-S14
Advanced Poly-Bagger as the integral packaging component. However, APPI cannot be responsible for
the successful integration of third party equipment, unless approved and integrated by APPI.
FREE CONSULTATION AND PRODUCT EVALUATION: We invite you to call to discuss your
packaging requirements and our free product packaging analysis.
8