Advanced Poly-Packaging T-1000 Advanced Poly-Bagger Operation Manual
Hide thumbs
Also See for T-1000 Advanced Poly-Bagger:
- Operation manual (156 pages) ,
- Instructions manual (7 pages) ,
- How-to (3 pages)
Related Manuals for Advanced Poly-Packaging T-1000 Advanced Poly-Bagger
Summary of Contents for Advanced Poly-Packaging T-1000 Advanced Poly-Bagger
- Page 9 Contents Chapter 4, Operation, Settings & Adjustments...
- Page 109 4.12 PTFE Adjustment An anti-stick sheet which prevents the bag from sticking to heater bar surfaces is located immediately behind the front plate. The sheet should periodically be inspected for wear or damage. If holes or tears exist, the rolls can be turned (rotated) to cover the contact surfaces with fresh material.
-
Page 115: Pressure Bar (Rubber) Replacement
4.17 Pressure Bar (Rubber) Replacement Located along the inside of the pressure bar is a strip of rubber, held on the pressure bar by a channel, pressing on the edges of the rubber. The rubber compresses against the front (gripper) plate holding the bag in place during sealing and during bag tear off. -
Page 122: Replace Thermocouple Wire
4.20 Replace Thermocouple Wire A thermocouple wire brazed to a ring terminal and secured to the top of the upper heater bar, detects the amount of heat the heater bar is emitting. The thermocouple wire is considered a normal wear item and will infrequently fail, requiring replacement. To determine if the thermocouple is bad, follow these trouble-shooting steps: 1) Locate the "E13"... - Page 149 SP-IO Spare Parts Kit (Level 1) (P/N T-SP-IO) APPI Part Number Quantity Description 10’ TP-TIP00145 1/4" poly tubing TP-TIP00146 5’ 3/8" poly tubing TP-TIP00181 Filters, micron filter (blower) TP-TIMOO115-A Tension (brake) strap TP-200189 1 AMP Fuses TP-200205 10 AMP Fuses TP-200206 2.5 AMP Fuses TP-200203...
Need help?
Do you have a question about the T-1000 Advanced Poly-Bagger and is the answer not in the manual?
Questions and answers