Advanced Poly-Packaging T-1000 How-To

Touch screen shortcuts

Hide thumbs Also See for T-1000:

Document: #HT000101

Document Title: Touch Screen Shortcuts

Product(s): T-1000, T-300/375

In the event that you have lost your Pass Codes, and cannot access the Bagger

settings, there are shortcuts that allow you to directly access the Level 2 Password

Screen.

On Bagger Models with a TP-220348 Touch Screen (V6) that has Function Keys on

the Right-Hand side, there are two options:

F1 – Help Screen displaying information about who to contact for Service

F5 – Passcode Entry Screen allowing entry of a Factory Passcode that will then

display Level 1 and level 2 Passcodes.

Page 1 of 3

Table of Contents

Need help?

Do you have a question about the T-1000 and is the answer not in the manual?

Page 1 Document: #HT000101 Document Title: Touch Screen Shortcuts Product(s): T-1000, T-300/375 Procedure: In the event that you have lost your Pass Codes, and cannot access the Bagger settings, there are shortcuts that allow you to directly access the Level 2 Password Screen.
Page 2 On later model Baggers, the Function Keys have been eliminated from the TP-220364 Touch Screen (TS1071). However, there are shortcuts that make use of keystrokes to allow access to the Startup and Bagger Password Setup Screens. Shortcut Methods: 1. With Bagger in stop, press and hold ‘Manual Cycle’...
Page 3 2. With Bagger in stop, press ‘Manual Cycle’ 3 times and it will take you to ‘Level 2’ password keypad. Enter ‘9876’ and it will take you to ‘Bagger Password Setup’ screen where you can change Level 1 or Level 2 passwords. Enter ‘9876’.

T-300T-375