Installation Procedures - Advanced Poly-Packaging Advanced Poly-Bagger T-1000-S18H Operation Manual

CAUTION: Ensure that any height adjustments allow for sufficient movement of the operator.
Improper height adjustments could negatively affect operator movement, causing strain, added stress,
discomfort, and fatigue.
CAUTION: Be careful when opening the seal frame as it may drop suddenly causing injury or
damage to the equipment.
CAUTION: To avoid injury, avoid coming in contact with pinch points including rollers, automatic
funnel doors or other moving components.
CAUTION: To avoid injury, avoid contact with Roller "Fingers" as they may be sharp.
CAUTION: Exercise care when adjusting or relocating the touch screen. Movement of the touch
screen could cause unexpected movement of the machine and injury to the operator.
CAUTION: If control or air pressure settings are set too high, higher noise levels may result from
increased part on part contact or part on machinery contact. Limit these settings and add guards or
covers to reduce airborne noise.
CAUTION: Exercise extreme care when clearing jams, replacing materials, changing controls or
mechanical settings, and cleaning internal parts. Be sure to de-energize energy sources prior to
removing guarding. Failure to do so may result in unexpected movement or flying objects, which could
cause crush, cut, or eye injuries.
CAUTION: Maintenance must be performed by specialized personnel. Qualified service engineers
must remove guards or covers to gain access to electrical or mechanical areas.
CAUTION: Maintenance must be performed regularly to ensure that the machine is operating
properly and to protect against injury. Routine maintenance includes: periodic inspections, the
replacement of worn or damaged components, the tightening of loose bolts or components, and regular
cleaning and adjustments. Contact APPI and/or service centers for service support if there is not
sufficient maintenance staff at your facility to perform regular maintenance.

2.3 Installation Procedures

The T-1000-S14 is transported as a single unit in a custom crate designed to protect the machine during
shipment. It is shipped completely assembled except for a few items that are easily attached during
installation. A final adjustment is also necessary to ensure proper placement of the touch screen, dancer
assembly, foot switch, funnel, and guards.
Unpacking: After removing the stretch wrapping, remove the outer crate from the skid that contains the
T-1000-S14. Unfasten the base support brace from the skid. Carefully lower the T-1000-S14 from the
skid. Transport the T-1000-S14 to the operating location prior to placing the touch screen in position and
unfastening the dancer assembly.
16