Operation Screen; Main Menu; Settings Screen - Advanced Poly-Packaging Advanced Poly-Bagger T-1000-S18H Operation Manual

3.5 Operation Screen

Operation Screen is provided to function with Pass Code
Protection function of the machine. If the pass code function
is enabled in the Technical Assistance Screen, the touch
screen will default to the Operation Screen after a preset time
has elapsed. This function prevents unauthorized operators
from making setting changes that could affect the operation
or performance of the unit. Since no settings are displayed on
the Operations Screen, the operator cannot change settings
unless a pass code is enabled. See Figure 3 - 2. There are
several Operations Screens, which are selected based on the
Operation, Auxiliary and Options installed. Figure 3 - 2 is the
most basic operation screen sample.
Figure 3 - 2

3.6 Main Menu

Main Menu screen allows the operator to quickly navigate to
other areas. See Figure 3 - 3.
Mode toggle buttons are located at the top of many screens:
<Start> / <Stop> toggle button controls operation mode, the
mode which enables the equipment to cycle.
<Manl>/ <Auto> toggle button activates the Automatic
(paced rate) or Auxiliary Cycle mode.
<Run> / <Setup> toggle button deactivates functions and
allows cycling when not at temperature.
Figure 3 - 3
Setup mode stops counters, production timers and auxiliary
signals so that the equipment can be operated independently in a setup mode.
Ready/Waiting LED (top left corner) displays "Ready" when the heater bar temperature is in the range of
acceptance. "Waiting" flashes when the machine is not at temperature. Waiting pauses the operation unless in the
setup mode.

3.7 Settings Screen

Bagger Settings Screen provides access to the basic
machine settings. Bag size, thickness and product
characteristics affect settings required for the proper
operation of the machine. See Figure 3 - 4.
All settings will be entered numerically on a keypad. To
adjust any value, press the green button of the setting
which you would like to change, then enter the value on the
number keypad followed by the <Enter> button.
The Settings Menu is where most entries and machine
operation settings will occur to setup a new bag size or to
Figure 3 - 4
run a new product.
28