Preventative Maintenance Checklist - Advanced Poly-Packaging Advanced Poly-Bagger T-1000-S18H Operation Manual

4.15 Preventative Maintenance Checklist

ITEM
Filter / Air regulator
Air regulator
Anti-jam device
Pressure bar (rubber)
Perforation sensor
Upper (rubber) roller
Lower (alum.) roller
Micron filter / Ventura
Wiring / Connectors
Air lines / Valves /
Cylinders
Compartments / Covers
Side-plates
Drive belt
Drive belt (right panel)
Touch screen cabinet /
arms
Height adjustments screws
CAUTION: Unplug power cord and disconnect air line prior to removing guards, funnels, or covers.
Preventative maintenance must be performed by qualified maintenance personnel.
Legend for Preventative Maintenance Checklist:
D Daily
W Weekly
M Monthly
CHART
DESCRIPTION
Drain water from filter
Adjust pressure to 60 PSI
Check operation, adjust as needed (section 4.11)
Clean with alcohol
Clean sensor assembly with alcohol
Inspect for nicks or cuts; clean with alcohol
Clean with alcohol
Inspect for contamination of filter, replace as needed
Inspect for blockage / air restriction
Inspect for loose wiring / connectors, tighten as needed
Inspect for loose air lines, listen for leaks, tighten, or replace
poly tubing as needed
Remove all covers, clean, and blow out compartments with
compressed air to remove dust and dirt
Clean and wipe down with lightweight oil (based upon
environmental humidity conditions)
Inspect for wear / fraying, replace if needed
Inspect for looseness, tighten as required
Tighten set screws
Tighten bolts
PERIOD
D
D
D
D
W
W
W
M
M
M
M
M
M
M
M
M
76