Table of Contents
Advertisement
This section explains how to configure the screens that let you maintain the firmware and configuration
files.
64.1 What You Can Do
• Use the Backup Configuration screen
use.
• Use the Firmware Upgrade screen
• Use the Reboot System screen
turning the power off and load a specific configuration file.
• Use the Restore Configuration screen
configuration file.
• Use the Save Configuration screen
settings to a specific configuration file on the Switch.
• Use the Tech-Support screen
there are problems with the Switch.
64.2 Backup Configuration
Backing up your Switch configurations allows you to create various "snap shots" of your device from
which you may restore at a later date.
Click Maintenance > Maintenance > Backup Configuration to display the screen as shown next. Use this
screen to back up your current Switch configuration and log files to a server or as local files to your
computer.
Figure 386 Maintenance > Maintenance > Backup Configuration
Follow the steps below to back up the current Switch configuration to your computer in this screen.
Chapter 64 Maintenance
C
Maintenance
(Section 64.2 on page
(Section 64.3 on page
(Section 64.4 on page
513) to restart the Switch without physically
(Section 64.5 on page
(Section 64.6 on page
(Section 64.7 on page
515) to create reports for customer support if
GS2220 Series User's Guide
511
H A P T E R
511) to save your configuration for later
512) to upload the latest firmware.
514) to upload a stored device
514) to save the current configuration
64
Advertisement
Table of Contents
Troubleshooting
