ZyXEL Communications 43222612 User Manual page 337

Chapter 36 Link Layer Discovery Protocol (LLDP)
Figure 256 Advanced Application > LLDP > LLDP-MED Location
The following table describes the labels in this screen.
Table 171 Advanced Application > LLDP > LLDP-MED Location
LABEL DESCRIPTION
Port Enter the port number you want to set up the location within the LLDP-MED network.
Location The LLDP-MED uses geographical coordinates and Civic Address to set the location
Coordinates information of the remote device. Geographical based coordinates includes latitude,
longitude, altitude and datum. Civic Address includes Country, State, County, City, Street
and other related information.
Latitude Enter the latitude information. The value should be from 0º to 90º. The negative value
represents the South.
• north
• south
Longitude Enter the longitude information. The value should be from 0º to 180º. The negative value
represents the West.
• west
• east
Altitude Enter the altitude information. The value should be from –2097151 to 2097151 in meters or in
floors.
• meters
• floor
GS2220 Series User's Guide
337