Enable Vlan Mapping; Vlan Mapping Configure - ZyXEL Communications 43222612 User Manual

Table of Contents

30.2 Enable VLAN Mapping

Click Advanced Application and then VLAN Mapping in the navigation panel to display the screen as

Figure 224 Advanced Application > VLAN Mapping

The following table describes the labels in this screen.

Table 140 Advanced Application > VLAN Mapping

Click the VLAN Mapping Configure link in the VLAN Mapping screen to display the screen as shown. Use

this screen to enable and edit the VLAN mapping rules.

Chapter 30 VLAN Mapping

Select this option to enable VLAN mapping on the Switch.

This field displays the port number.

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this row first to set

the common settings and then make adjustments on a port-by-port basis.

Note: Changes in this row are copied to all the ports as soon as you make them.

Select this check box to enable the VLAN mapping feature on this port. Clear this check box to

disable the VLAN mapping feature.

Click Apply to save your changes to the Switch's run-time memory. The Switch loses these

changes if it is turned off or loses power, so use the Save link on the top navigation panel to save

your changes to the non-volatile memory when you are done configuring.

Click Cancel to begin configuring this screen afresh.

GS2220 Series User's Guide