ZyXEL Communications 43222612 User Manual page 62

Figure 48 Wizard > Basic Settings > Step 3 Networked AV
Each field is described in the following table.
Table 10 Wizard > Basic Settings > Step 3 Networked AV
LABEL DESCRIPTION
Skip Networked AV Click this option to avoid using the basic default AVoIP settings. The default AVoIP settings
Mode Settings can be seen in Step 4 Summary under Networked AV – Basic Settings.
Otherwise, clear the check box and follow the diagram for connecting RJ45 ports to audio
and video equipment. The Inter-switch Connection is for connecting to another switch.
Note: Use the Wizard > Advanced Settings > Step 3 Networked AV to configure
Previous Click Previous to show the previous screen.
Next Click Next to show the next screen.
Cancel Click Cancel to exit the Wizard without saving.
The following table shows the default settings by port role.
Table 11 Port Role and Default Settings
SCREEN
Port Status
Port > Port Setup
Switching > Multicast > IGMP Snooping
After clicking Next, the Summary screen appears.
Chapter 4 Web Configurator
connections for non-Audio-Video equipment (for example computer, NAS)
to the RJ45 ports.
TX / RX
IGMP Leave Mode is Immediate
Flow Control is Rx
IGMP Querier Mode is Auto
GS2220 Series User's Guide
62
INTER-SWITCH
IGMP Leave Mode is Fast
Flow Control is Disable
IGMP Querier Mode is Fixed