This chapter explains how to configure the maintenance screens that let you maintain the firmware
and configuration files.
47.1 The Maintenance Screen
Use this screen to manage firmware and your configuration files. Click Management >
Maintenance in the navigation panel to open the following screen.
Management > Maintenance
Figure 338
The following table describes the labels in this screen.
Table 222 Management > Maintenance
LABEL
Current
Firmware
Upgrade
Restore
Configuration
Backup
Configuration
Erase
Running-
Configuration
Save
Configuration
DESCRIPTION
This field displays which configuration (Configuration 1 or Configuration 2) is currently
operating on the Switch.
Click Click Here to go to the Firmware Upgrade screen.
Click Click Here to go to the Restore Configuration screen.
Click Click Here to go to the Backup Configuration screen.
Click Click Here to reset the current configuration of the Switch. Note that this will not reset
the configuration to the factory default settings.
Click Config 1 to save the current configuration settings to Configuration 1 on the Switch.
Click Config 2 to save the current configuration settings to Configuration 2 on the Switch.
GS3700/XGS3700 Series User's Guide
447
C
HAPTER
Maintenance
4 7