Table of Contents
Advertisement
Table 177 Advanced Application > BPDU Guard > BPDU Guard Configuration (continued)
LABEL
DESCRIPTION
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active
Select this check box to enable the BPDU guard feature on this port. The Switch shuts down this
port if there is any BPDU received on the port.
Clear this check box to disable the BPDU guard feature.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Chapter 38 BPDU Guard
GS2220 Series User's Guide
346
Advertisement
Table of Contents
Troubleshooting
