37.1 Overview
This chapter explains how to configure the screens that let you maintain the firmware and configuration
files.
37.1.1 What You Can Do
• Use the Maintenance screen
files.
• Use the Firmware Upgrade screen
• Use the Restore Configuration screen
configuration file.
• Use the Backup Configuration screen
use.
• Use the Erase Running-Configuration screen
the Zyxel default configuration settings.
• Use the Save Configuration screen
settings to a specific configuration file on the Switch.
• Use the Reboot System screen
turning the power off and load a specific configuration file.
• Use the Tech-Support screen
there are problems with the Switch.
• Use the Certificates screen
Switch's CA-signed certificates.
37.2 Maintenance Settings
Use this screen to manage firmware and your configuration files. Click Management > Maintenance in
the navigation panel to open the following screen.
Maintenance
(Section 37.2 on page
(Section 37.3 on page
(Section 37.4 on page
(Section 37.5 on page
(Section 37.2.1 on page
(Section 37.2.2 on page
(Section 37.2.3 on page
(Section 37.6 on page
(Section 37.7 on page
302) to see the Certificate screen and import the
XS1930 Series User's Guide
294
C
H A P T E R
294) to manage firmware and your configuration
298) to upload the latest firmware.
299) to upload a stored device
300) to save your configurations for later
296) to reset the configuration to
296) to save the current configuration
296) to restart the Switch without physically
300) to create reports for customer support if
37