ZyXEL Communications 43222612 User Manual page 68

Table of Contents

Table 15 Wizard > Advanced Settings > Step 3 Networked AV

Select all ports

After you create a VLAN, select the ports to be assigned to the Networked AV VLAN.

Select all ports to assign the same role all ports.

You can select a port by clicking it. Then click any of the following:

Click Tx/Rx to assign the ports for connecting to networked audio and video equipments.

Click Inter-switch to assign the ports for connecting to other switches.

Click Management to assign the ports for connecting to non-Audio-Video equipment (for

example, computer and NAS).

Link aggregate

Select this option to aggregate multiple port bandwidth if you are connecting to another

switch. Link aggregation (trunking) is the grouping of physical ports into one logical higher-

capacity link.

Click Previous to show the previous screen.

Click Next to show the next screen.

Click Cancel to exit this screen without saving.

After clicking Next, the Summary screen appears.

Figure 53 Wizard > Advanced Settings > Step 4 Summary

Each field is described in the following table.

Table 16 Wizard > Advanced Settings > Step 4 Summary

This field displays a host name.

Chapter 4 Web Configurator

Table 11 on page 62

for the default settings based on the port role.

GS2220 Series User's Guide

Troubleshooting